How do I swap the print in my Xpozer frame?

Swapping prints is what Xpozer is made for — it takes about 30 seconds:

1. Take the frame off the wall and lay it face-down.
2. Release the tension springs and unclip the frame from the corner mounts of the current print.
3. Click the frame onto the corner mounts of your new print (every SwapPrint comes with its own corner mounts).
4. Re-tension the springs and hang it back up.

Store the print you removed rolled up or flat, away from direct sunlight and heat — so you can rotate your favorites whenever you like.

Order a new photo for your existing frame as a SwapPrint in the same size as your frame.

Updated on: 29/10/2026