> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://help.xpozer.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How do I mount and hang my Xpozer print?

Mounting an Xpozer takes a few minutes and needs no special skills. Step-by-step instructions are included with your order.

**In short:**

1. Lay the print face-down on a clean, soft surface.
2. Assemble the frame and click it onto the corner mounts on the back of the print.
3. Use the tension springs to pull the print tight — it should be smooth and drum-tight.
4. Attach the wall mount to your wall with a single screw and hang your Xpozer. It floats about 2.5 cm off the wall.

**Tips:**

- Work calmly on the corners; the print material is flexible but shouldn't be forced.
- A second pair of hands helps for sizes above 100 cm.

Lost the instructions, or does something not fit? Contact us with your order number and a photo of the back of your print — we'll send you the right manual or the missing part.